Description
Product details
Technical Data
| Display range AC | 1 V - 1,000 V | |
| Display range DC | 1 V - 1,200 V | |
| Display | LCD (illuminated) / LED | |
| Manufacturer's designation | DIGITAL | |
| IP Index of Protection | IP 65 | |
| Three phase sequence testing | LED | |
| Phase testing | LED | |
| Polarity testing | LCD | |
| Continuity testing | acoustic / LED | |
| contactless detection of broken cables | yes | |
| Vibration alarm | yes | |
| Illumination of probe points | yes | |
| Diode | 0.3 V - 2 V | |
| Resistance | 0.1 kΩ - 300 kΩ | |
| Frequency measurement | 1 Hz - 1,000 Hz | |
| Overvoltage category | CAT III 1000 V; CAT IV 600 V | |
| Power supply | Battery-powered | |
| Number of batteries contained | 2 | |
| Article no of the battery / rechargeable battery fitted | 081551 LR3 | |
| electrical insulation | VDE 1000 V | |
| Type of product | Voltage tester |
Identification & Classification
| Article number | 473105 DIGITAL | |
| EAN / GTIN | 4014651502635 | |
| Manufacturer number | 050263 | |
| Manufacturer | BENNING GmbH & Co. KG, Münsterstraße 135-137, 46397 BOCHOLT, Germany, www.benning.de |
Description
Version:
AC voltage testing with true effective value procedure True RMS.
Two-pole voltage tester with VDE kitemark. Shockproof, dustproof body. Protected against sprayed water, with rubberised gripping surfaces.
The voltage display from 50 V is operational even it the batteries are flat or have been taken out.
Two-pole voltage tester with VDE kitemark. Shockproof, dustproof body. Protected against sprayed water, with rubberised gripping surfaces.
The voltage display from 50 V is operational even it the batteries are flat or have been taken out.
Function:
IP65: Protected against jets of water from all directions and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
Suitable for manual crafts, and for working on electrical systems, industrial systems, maintenance, servicing (troubleshooting),
For professional multi-stage voltage and polarity testing, with load switching (30 mA RCB trip by push button). Approved for voltage testing on systems up to 1000 V. Suitable for working on photovoltaic and wind turbine installations and hybrid vehicles.
Standard:
DIN EN 61243-3, VDE 0682-401:2015
