Product Description
Garant Torque Screwdriver Without Scale
Garant Torque Screwdriver without Scale (.1-.5 Nm range)
Version:
Power gripwith comfortable easy-gripHaptoprene®surface allows transmission of the required torque with no problems even withwet or oily hands.On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
Bit holder with magnetto take C 6.3 bits.
The desired torque can be set by stepless adjustment using a torque analyser (No. 654300 − 654460) and a 5 AF hexagon screwdriver (not supplied). When 20 or more of a size are ordered, they can be factory pre-set.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Technical Data
| maximum torque | 50 cNm |
| Direction of tightening | Right-hand tightening |
| Torque measuring accuracy | ±6 % |
| Bit socket | D 6,3 |
| Test certificate | Manufacturer’s test certificate |
| Calibration | O6; O7 |
| Overall length L | 126 mm |
| set torque | 0.2 Nm |
| Torque range | 10 cNm - 50 cNm |
| Torque range | 0.1 Nm - 0.5 Nm |
| maximum ⌀ | 29 mm |
| Release signalling | akustisk; haptisk |
| Trigger principle | mechanical slip clutch |
| Connection format | Bit holder 1/4 inch |
| Measurement technology | mechanical |
| Data can be recorded | no |
| Setting the trigger value | without setting scale (requires torque analyser) |
| Feedback | triggering |
| Reversible reading | Nm |
| Measurement process | Torque |
| Adjustable trigger value | preset |
| Standard | DIN EN ISO 6789 |
| Weight | 71 g |
| Type of product | Torque screwdriver |
| Article number | 659907 50 |
| EAN / GTIN | 4045197923479 |
