These Holex INOX Thin Cutting Discs are German Cutting Discs, available in two sizes, that are ultra thin and designed to offer outstanding results in a variety of environments. Sold in boxes of 25 and available in 115 mm and 125 mm sizes, Holex INOX Cutting Discs are optimized for maximum cutting performance.
Information:
Grit, bonding, abrasive additives as well as reinforcement of the cut-off discs are optimised for maximum cutting performance and working life in their respective applications.
Thin cutting discs (0.8 mm / 1.0 mm / 1.6 mm) specially suited for quick burr-free cutting with low thermal stress.
Cutting discs from 2.0 mm disc thickness exhibit increased lateral stability, stiffness and service life.
Application:
For freehand cutting using electric and pneumatic angle grinders with maximum 80 m/s peripheral cutting speed vc.
Technical Data:
115 mm:
Grinding medium Code: A
Specification: A60P-BF
Iron, sulphur and chlorine constituents: < 0.1 %
Shape: 41
Shape description: Fat
Disc diameter: 115 mm
Disc thickness: 1 mm
Bore diameter: 22.23 mm
For material thickness: 3 mm - 5 mm
Recommended approach angle: 90 degrees
Optimized For: Steel
Designed for: Angle grinders
Maximum circumferential speed: 80 m/s
Maximum speed: 13,300 rpm
125 mm:
Grinding medium code: A
Specification: A60P-BF
Iron, sulphur and chlorine constituents: < 0.1 %
Shape: 41
Shape description: Flat
Disc diameter: 125 mm
Disc thickness: 1 mm
Bore diameter: 22.23 mm
For material thickness: 3 mm - 5 mm
Recommended approach angle: 90 degrees
Optimized for: Steel
Designed for: Angle grinders
Maximum circumferential speed: 80 m/s
Maximum speed: 12,200 rpm
Application Table: