This Kukko Ball Bearing Extracting Set with Counterstay and Slide Hammer is a Kukko Part K-22-B German ball bearing extracting set for extracting inner bearings, bearing outer rings and bushings.
Description
The 8-part ball bearing extractor set with counter stay and slide hammer K-22-B is used to extract internal bearings, bearing outer rings and bushes in trades, workshops and industry. The multi-shell design of the internal extractors with their extra large gripping edges allows the safe extraction of internal parts. The enclosed counter stay or slide hammer are used with the internal extractors, depending on whether there is sufficient support surface. The set is available in different versions depending on the size of the ball bearing and the extraction situation.
Application
-
For extracting internal bearings, bearing outer rings and bushes
Benefit
- Application-oriented compilation for universal use
- Storage in the box makes it easy to keep track of the completeness of the set
- The internal extractors, together with the counter-support and slide hammer, are capable of finding a suitable answer in versatile extraction situations
- Depending on the existing conditions, the counter-support and sliding hammer enable optimum and safe extraction in alternating applications
- Accessories are included in the set to complement the practical application
Operation
- Determine the inner diameter of the ball bearing and select a suitable inner extractor
- Insert the inner extractor into the bore and tighten the clamping nut
- If a support surface is available, choose a counter-support, otherwise choose a slide hammer
- Support the counter-support on the housing and screw it onto the wedge spindle of the internal extractor
- Hold the handle of the counter-support and pull the bearing out safely by tightening the nut
- Re tighten the tensioning nut when pulling out
- Screw the slide hammer rod onto the wedge spindle of the internal extractor
- Use the slide hammer with a hammering motion to pull out the bearing
Technical Data:
Inner diameter of ball bearing: Metric: 28 - 70 mm Imperial: 1 1/8 - 2 3/4 inch
Overall length of slide hammer: Metric: 290 mm Imperial: 11 3/8 inch
Mass of impact: 0.9 kg
Slide hammer rod connection thread: Metric: M12 Imperial: M12
Internal thread: Metric: M12 - 15-16G Imperial: M12 - 15-16G
Threaded adapters (IG + AG): Metric: AG: 15-16G - IG: M10 Imperial: AG: 15-16G - IG: M10
