This Kukko PULLPO Ball Bearing Puller Set, Kukko Part K-70-C, is a German ball bearing puller set designed to remove grooved ball bearings without causing damage and without having to dismantle the shaft.
Description
The 38-part ball bearing puller set "PULLPO" K-70-C is used for the completely non-destructive removal of deep groove ball bearings without removing the shaft in trade, industry and workshops. Even without the possibility of support, the PULLPO can safely remove bearings that would otherwise be impossible to grip, thus ensuring that the affected parts can be reused. The PULLPO not only impresses with its innovative design, but also with its ease of use, and the specially developed Pulling hooks enable a reliable hold during the removal process and higher removal forces. In addition to the PULLPO, the set also includes suitable hooks and rings for appropriate use.
Application
-
For completely non-destructive extraction of deep groove ball bearings without dismounting the shaft
Benefit
- Application-oriented compilation for universal use
- Storage in the box makes it easy to keep track of the completeness of the set
- The special crossbar shape enables safe, easy hooking and the lever-operated self-tensioning of the trigger hooks (PULLPO Technology)
- Due to the collar on the spindle head, the torque spanner cannot slip off during use, which enables pulling off without leaving a trace
- Four magnets for easy holding of the counterpressure ring
Operation
- Depending on the size of the ball bearing, select PULLPO with three or four arms
- Insert the arms/hooks of the extractor into the outer ring of the bearing to be extracted using the support rings
- Operate the spindle with a torque spanner and pull off the bearing safely and gently in this way
Technical Data:
For Metric and Imperial Ball Bearings: ISO 6000-6020; 6200-6212; 6300-6311; 6403-6408
Inner diameter of ball bearing: Metric: 10 - 100 mm Imperial: 3/8 - 3 7/8 inch
Outer diameter of ball bearing: Metric: 256 - 150 mm Imperial: 1 1/32 - 5 7/8 inch
Hexagon drives (male): Metric: 13 and 17
K-70 jaws length: Metric: 70 and 156 mm Imperial: 2 3/4 and 6 3/16 inch
Number of jaws: Metric: 14 Imperial: 14
Number of rings: Metric: 13 St. / pcs. Imperial: 13 St. / pcs.
Diameter of support ring: Metric: 19 - 77.5 mm Imperial: 3/4 - 3 1/16 inch
Counter-pressure pad for extraction of ball bearing with hollow shaft: Metric: 10 - 42 mm Imperial: 3/8 - 1 5/8 inch
Number of counter-pressure pads: Metric: 4 St. / pcs. Imperial: 4 St. / pcs.
Diameter of counter-pressure pads: Metric: 35 - 80 mm Imperial: 1 3/8 - 3 3/16 inch
Pullpo Technology: The special cross-beam shape enables safe and easy mounting and automatic clamping of the jaws via leverage transmission.