Quick view Canela | sku: U25036 1000R/43 Canela DDJNR164DN Clamping Holder 1x1x6 MSRP: Now: $72.57 Add to Cart SALE Quick view Canela | sku: U25027 Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela | sku: U25026 1000L/43 Canela DDJNL164D 1X1X6 Tool Holder MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela | sku: U25029 Canela Accessories for MDJNR 93° Indexable Turning Holder MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view Canela | sku: U25028 MDJNR 93° Indexable Turning Holder MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela | sku: U25044 Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Now: $84.44 Choose Options SALE Quick view Garant | sku: 251912 Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Canela | sku: U25027 Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela | sku: U25026 1000L/43 Canela DDJNL164D 1X1X6 Tool Holder MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela | sku: U25029 Canela Accessories for MDJNR 93° Indexable Turning Holder MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view Canela | sku: U25028 MDJNR 93° Indexable Turning Holder MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela | sku: U25044 Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Now: $84.44 Choose Options SALE Quick view Garant | sku: 251912 Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Canela | sku: U25026 1000L/43 Canela DDJNL164D 1X1X6 Tool Holder MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela | sku: U25029 Canela Accessories for MDJNR 93° Indexable Turning Holder MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view Canela | sku: U25028 MDJNR 93° Indexable Turning Holder MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela | sku: U25044 Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Now: $84.44 Choose Options SALE Quick view Garant | sku: 251912 Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Canela | sku: U25029 Canela Accessories for MDJNR 93° Indexable Turning Holder MSRP: Was: Now: $0.88 - $5.52 Choose Options
SALE Quick view Canela | sku: U25028 MDJNR 93° Indexable Turning Holder MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela | sku: U25044 Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Now: $84.44 Choose Options SALE Quick view Garant | sku: 251912 Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Canela | sku: U25044 Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Now: $84.44 Choose Options SALE Quick view Garant | sku: 251912 Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Garant | sku: 251912 Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Canela | sku: U25043 Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Garant | sku: 250006 Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand MSRP: Now: $99.12 Choose Options Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Canela DDJNR164DN Clamping Holder 1x1x6 This Canela DDJNR164DN Clamping Holder is designed to work with machining and is sized at 1x1x6. This DDJNR164DN RH Turning Toolholder from Canela has a 55 Degree Insert. MSRP: Now: $72.57 Add to Cart SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Canela DDJNR164DA 1x1x6 Clamping Toolholder Coolant Holder This Canela DDJNR164DA 1x1x6 Clamping Toolholder with Coolant Holder is designed for clamping requirements in machining. These are available in both right hand and left hand models with a 55 degree insert. MSRP: Was: $97.27 Now: $80.59 Choose Options SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Canela DDJNL164D 1X1X6 Tool Holder This Canela DDJNL164D 1X1X6 Tool Holder is a turning toolholder for a variety of uses. This left hand turning toolholder has a 55 degree insert. MSRP: Was: $72.57 Now: $59.76 Add to Cart Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Canela Accessories for MDJNR 93° Indexable Turning Holder These Canela Accessories for the MDJNR 93° Indexable Turning Holder are designed to allow for customization of the MDJNR164D Holder. MSRP: Was: Now: $0.88 - $5.52 Choose Options
SALE Quick view MDJNR 93° Indexable Turning Holder The Canela MDJNR 93° Indexable Turning Holder is a multipurpose toolholder equipped with rhombic negative doublesided inserts (angle 55°) with strong cutting edge, available in right hand and left hand models. The double clamping (pin + clamp)... MSRP: Was: $112.00 Now: $80.00 Choose Options Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Canela MWLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MWLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch sizes, with both right hand and left hand models available. Models: U25044RH - 1000R/43 - Right HandU25044LH - 1000L/43 - Left Hand MSRP: Now: $84.44 Choose Options SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Garant MWLN 95° Clamping Toolholder for Indexable Inserts Metric This Garant MWLN 95° German Clamping Toolholder for Indexable Inserts is available in both right hand and left hand models in metric sizes. Models: 251912: Right Hand251913: Left Hand Standard:DIN ISO 5610 Setting angle κ: 95 degreesType of... MSRP: Was: $111.95 Now: $100.50 Choose Options SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
SALE Quick view Canela MCLN 95° Multi-Clamp Toolholder Indexable Inserts Inch Measurements This Canela MCLN 95° Multi-Clamp Toolholder for Indexable Inserts is available in inch increments and can be purchased in right hand and left hand models. 1000R/43: Right Hand1000L/43: Left Hand MSRP: Was: $84.44 Now: $60.00 Choose Options Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected × OK
Quick view Garant MCLN 95° Clamp Toolholder for Indexable Inserts Right and Left Hand This Garant MCLN 95° Clamp Toolholder for Indexable Inserts is available in Right Hand and Left Hand Models for use in a variety of applications.Standard: DIN ISO 5610Through-coolant: NoSetting angle: κ95 degreesType of product: Boring bar... MSRP: Now: $99.12 Choose Options Compare Selected
