Kyocera PNMU Indexable Inserts MFPN 450 Face Mill Box of 10 Price Per Unit

These Kyocera PNMU Indexable inserts for MFPN 450 face mill offer increased insert thickness for the highest metal removal rates and are protected against wear by the latest coating. Both ISO code models are sold in a box of 10.     WARNING:...

Garant Power Tang 90° High Performance Tangential Shoulder Milling Cutter 50/4 mm

This Garant Power Tang 90° high performance tangential shoulder milling cutter 50/4 mm is a HoffmannGroupUSA.com used, fully functional Garant Power Tang 90° high performance tangential German shoulder milling cutter 50/4 mm.Original...

Garant RC.X 1204 HB7035-1 Set of 3 Inserts

This set of 3 Garant German RC.X 1204 HB7035-1 Inserts are a HoffmannGroupUSA.com Clearance item that are usually sold in a box of 10. These three German inserts are brand new and unused; this clearance item contains 3 inserts instead of a box of 10...

Kyocera WNMU Indexable Inserts U22028 MFWN Face Mill Box of 10 Price Per Unit

These Kyocera WNMU Indexable inserts for U22028 MFWN face mill are MEGACOAT-coated indexable inserts with 6 edges due to the insert being double-sided. The high axial rake angle up to a maximum of 13° ting force makes the GM geometry the first choice...

Kyocera 90° MFWN M-Six Indexable Face Mill WNMU 0806 Inserts

The Kyocera 90° MFWN M-six indexable face mill for WNMU 0806 with milling inserts is available in Inch Measurements. This Kyocera MFWN Face Mill milling cutter with double-sided inserts and six cutting edges offers the combination of approach angle,...

Kyocera 90° Indexable Face Mill MEW Milling Inserts Box of 10 Price Per Unit

These Kyocera 90° indexable face mill MEW Milling Inserts are MEGACOAT-coated indexable inserts with 4 edges. The high axial rake angle up to a maximum of 10° significantly reduces the cutting force. These items are sold in a box of 10 but priced...

Kyocera 90° Indexable Face Mill MEW Milling Inserts Inch Increments

The Kyocera 90° indexable face mill MEW with Milling Inserts are available in inch increments, with the M-Four MEW being a cost effective 90° milling cutter with 4 cutting edges. The Size .625/2 variant comes without internal coolant.

Kyocera 90° Degree Inserts MEW Indexable Face Mill

This Kyocera 90° Indexable Face Mill MEW Milling Inserts is available in Inch Measurements and is a a cost effective 90° milling cutter with 4 cutting edges.   WARNING: This product can expose you to Cobalt and Nickel which are known to the...

Garant MTC Milling Inserts Softcut Indexable Milling Cutters

These Garant MTC German milling inserts for Softcut® German indexable milling cutters are priced per unit and sold in a box of 10. These German engineered Garant MTC Milling Inserts are designed for use with Garant Softcut® indexable milling...