-
Sku: 207490
Garant Master Steel Solid Carbide Ball Nose Slot Drill HPC TiAlN
MSRP:Was: $56.83Now: $42.79 - $54.49Version: Precision ground for very high accuracy requirements.Tolerance: Radius contour = ±0.005 mm.Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fin…
-
Sku: 207097
Garant Solid Carbide High Precision Ball Nose Slot Drill DLC
Now: $74.61MSRP:Was:Version: With DLC coating sp2 of the latest generation.High precision ball nose slot drills in respect of radius ⌀ and contour variations within the µm range.Tolerances: radius contour = ±â€¦
-
Sku: 205716
Garant Solid Carbide Roughing End Mill with Internal Coolant Supply MTC TiAlN
Now: $304.57MSRP:Was:Version: Optimised special knuckle profile for roughing.Very high rate of metal removal. Can be used as a universal end mill.Special cooling channel system, to achieve the best possible high performance machini…
-
Sku: 205551
Garant Master Steel SlotMachine Solid Carbide Roughing End Mill with Through-Coolant HPC TiAlN
Now: $188.57MSRP:Was:Version: With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.Feed rate per tooth…
-
Sku: 205267
Garant Master Alu SlotMachine Solid Carbide Roughing End Mill with Through-Coolant HPC / TPC DLC
Now: $183.46MSRP:Was:Version: For roughing.Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.Improved chip evacuation due to central thr…
-
Sku: 203211
Garant Diabolo Solid Carbide Milling Cutter HPC
Now: $43.09MSRP:Was: $57.23Version: GARANT Diabolo:Special geometry, coating and carbide, specially for hard machining.Dimensions similar to DIN 6527. Tool material: Solid carbide Standard: DIN 6527 Type: H Helix angle characteristic: unequal spacing Cutt…
-
Sku: 203203
Garant Master Alu solid carbide milling cutter, HPC HPC DLC
MSRP:Was: $115.50Now: $86.96 - $196.24Version: For finishing operations.Special geometry for optimum chip evacuation.Unequal spacing gives high intrinsic stability and smooth cutting action.For profile milling as a finishing operation. Tool material: Solid carbide S…
-
Sku: 202976
Garant Solid Carbide Roughing End Mill MTC TiAlN
MSRP:Was: $45.28Now: $34.09 - $43.56Version: Significant cutting force reduction due to 45° helix. Application: Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres. Note: For materials > 55 HRC we reco…
-
Sku: 202512
Garant Master Alu Solid Carbide Milling Cutter HPC DLC
MSRP:Was: $55.39Now: $41.71 - $78.88Version: Extra sharp cutting edges.Dimensions similar to DIN6527.For roughing and finishing.Up to 2×D into solid material at very high feed rates and smooth cutting action.With the latest generation of DLC coating sp2. …
-
Sku: 202243
Garant Solid Carbide MTC End Mill
MSRP:Was: $36.90Now: $27.78 - $131.98Version: Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.Lengths similar to DIN 6527 long. Tool material: Solid car…
-
Sku: 203282
Garant Diabolo Solid Carbide Milling Cutter HPC TiAlN
Now: $181.93MSRP:Was:This Garant Diabolo German Solid Carbide Milling Cutter HPC TiAlN is available in metric sizes and offers special geometry, coating and carbide milling, specifically designed for hard machining. Application:For profile milling as …
-
Sku: 203007
Garant Master INOX Solid Carbide Milling Cutter HPC TPC TiAlN Metric Sizes
Now: $42.11MSRP:Was:This Garant Master INOX German Solid Carbide Milling Cutter HPC TPC TiAlN is available in metric sizes and is designed for roughing and finishing.The HPC German end mill with newly developed high-performance coating is designed fo…
-
Sku: U20041
Promax US556 5 Flute Solid Carbide Universal High Performance End Mill Inch Measurements
MSRP:Was: $37.81Now: $18.91 - $63.14The Promax Series US556 5 Flute Solid Carbide Universal High Performance End Mills are available in inch measurements and are a high performance 5 flute solid carbide end mill available in both square end options and with cor…
-
Sku: U20044
Promax US007 4 Flute Solid Carbide Universal High Performance End Mill Inch Measurements
MSRP:Was: $23.88Now: $11.94 - $30.55The Promax Series US007 4 Flute Solid Carbide Universal High Performance End Mill is available in inch measurements and is a high performance 4 flute solid carbide end mill available in both square end or corner radii options. Cut…
-
Sku: U20040
SGS Z-CARB HPR Series Z5 Solid Carbide 5 Flute End Mill
Now: $11.36MSRP:Was: $22.72The SGS Z-CARB HPR series Z5 Solid Carbide End Mill is available in inch measurements and is a 5 flute solid carbide roughing end mill, designed with the ideal balance of helix, indexing, flute depth, rake and relief to achieve hi…
-
Sku: U20038
SGS Series 43 S-CARB Solid Carbide End Mill Inch Measurements
MSRP:Was: $15.61Now: $7.81 - $73.01This SGS Series 43 S-CARB Solid Carbide End Mill is available in inch measurements and is a 3 flute, solid carbide square end mill designed for high performance machining in non-ferrous work piece materials. This milling cutt…
-
Sku: 202004
Garant Master Alu PickPocket HPC Solid Carbide Roughing End Mill
MSRP:Was:Now: $93.01 - $119.07This Garant Master Alu PickPocket HPC German Solid Carbide Roughing End Mill is available in metric sizes and designed for roughing and finishing. With up to 2 × D into solid material at very high feed rates and smooth cutti…
-
Sku: 202272
Garant Solid Carbide End Mill MTC Metric Sizes
MSRP:Was:Now: $46.81 - $304.57This Garant German Solid Carbide End Mill MTC is available in metric sizes with the latest generation of DLC coating sp2. This Solid Carbide German End mill offers eccentric relief ground, additional polish ground in the flutes fo…
-
Sku: 202241
Holex Solid Carbide End Mill Uncoated Metric Sizes
MSRP:Was:Now: $29.66 - $198.28This Holex German Solid Carbide End Mill in metric sizes offers eccentric relief ground, additional finish ground in the flutes for outstanding chip evacuation in long-chipping aluminum workpieces in an uncoated solid carbide slot…
-
Sku: U20030
SGS Series 1 Solid Carbide Square End Mill Inch Measurements
Now: $44.33MSRP:Was: $88.65This SGS Series 1 Solid Carbide End Mill is available in Inch Measurements and is a 4 flute, solid carbide square end mill with Ti-NAMITE-A coating for applications in a wide range of work place materials. WARNING: This pr…
-
Sku: 202760
Holex Solid Carbide End Mill Metric Sizes
MSRP:Was:Now: $15.45 - $152.30This Holex Solid Carbide End Mill is a TiAlN coated, solid carbide end mill, available in metric sizes, that offers an eccentric relief ground without a 45° cutting edge chamfer. Technical Data: Coating: TiAlN Tool material…
-
Sku: 202725
Garant Solid Carbide End Mill Metric Sizes
MSRP:Was: $29.13Now: $14.57 - $450.73This premium Garant German Solid Carbide End Mill is a TiAlN coated, solid carbide German end mill, available in metric sizes, that offers a double relief ground side clearance angle without a 45° cutting edge chamfer. Technic…
-
Sku: 192850
Holex Roughing End Mill Center Cutting Teeth Metric Sizes
MSRP:Was: $29.54Now: $14.77 - $48.93This Holex German Roughing End Mill is available in metric sizes, features center cutting teeth for plunging, a relief ground fine pitch knuckle form profile with a TiAlN coating. Coating: TiAlNTool Material: HSS Co8Standard: DI…
-
Sku: U19010
YG Tools HSS-Co 8% 4 Flute Center Cutting End Mill Inch Measurements
Now: $13.47MSRP:Was: $26.95This YG Tools HSS-Co 8% 4 Flute Center Cutting End Mill is TiAlN coated and recommended for pocketing, trace milling, cam milling, die sinking and slotting.
-
Sku: 191590
Holex Multi-Flute End Mill Metric Sizes
MSRP:Was:Now: $16.74 - $92.67This Holex German Multi-Flute End Mill offers eccentric relief ground with a TiAlN coating and HSS-Co8 tool material in multiple metric sizes. Technical Data: Coating: TiAlNTool Material: HSS Co 8Standard: DIN 844 BType: NThrough …