Garant Power Q Indexable Milling Cutter

Spare part: Pack of insert screws No. 219799 1 (8IP; 1.2Nm). Note: Use GARANT torque screwdriver TQ No. 211750 size 1.2 with bit No. 674252 size 8IP.When working with extensions, always use internal cooling. ...

Garant FeedKing Indexable Face Mill with High Feed Rate

Version: Dynamic cutting edge geometry for highest feed rates. Extremely smooth cutting due to self-stabilising insert bedding. Optimised geometry for reduced cutting forces, thereby reducing the stress on the main spindle. Advantage:...

Garant TwinCut 45° Indexable Face Mill

Version: From Ø 160 mm for arbors to DIN 2079, with 4 additional attachment holes and without internal cooling. Application: With double-sided 8-edge inserts (ON.U) or 4-edge inserts (SN.U). Spare part: Shim No. 219897 for use with...

Garant Softcut HSI wide pitch

Version: Individual tool geometry ensures very smooth cutting. Exceptionally sturdy insert design for best feed rates. Indexable inserts are secured by special screws with high shear resistance. Application: For outstanding surface quality. Burr-free...

Garant Power Tang 90° Tangential HPC shoulder mill

Version: Maximum stability due to tangentially arranged inserts. High feed rate values for maximum metal removal rate due to optimum indexable insert with stability in the direction of the cutting force. Note: Use GARANT torque screwdriver TQ No...

Garant Softcut 90° Shoulder Mill MTC Long

Version: High precision indexable face mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable face mills with special geometry for reduced...

Garant Softcut® 90° Shoulder Mill MTC

Version: High precision indexable face mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable face mills with special geometry for reduced...

Kyocera 90° MFWN M-Six Indexable Face Mill WNMU 0806 Inserts

The Kyocera 90° MFWN M-six indexable face mill for WNMU 0806 with milling inserts is available in Inch Measurements. This Kyocera MFWN Face Mill milling cutter with double-sided inserts and six cutting edges offers the combination of approach angle,...

Kyocera 90° Indexable Face Mill MEW Milling Inserts Inch Increments

The Kyocera 90° indexable face mill MEW with Milling Inserts are available in inch increments, with the M-Four MEW being a cost effective 90° milling cutter with 4 cutting edges. The Size .625/2 variant comes without internal coolant.